Revit Update Direct Download Link » What Revit Wants
Looking for:
Autodesk's Revit Release—Big New MEP Features |
Revit Update – Rebar Constraints – Autodesk Revit Structure.
دانلود Autodesk AutoCAD + LT x64 + Full Help - اتوکد، قدرتمند.Autodesk’s Revit Release is on Point
When working on a building design, many factors must be balanced. One factor that must always be considered is that of life safety, where distances to the exits are essential calculations for compliance with fire codes. Revit introduced the path of travel tool to assist in measuring travel distance requirements to make fire life safety simple and fast to calculate. Both Revit The path of travel tool in Revit lets you select 2 points in a floorplan and calculate the shortest route between those 2 points, avoiding elements you have defined as obstacles.
The calculated path uses a mm clearance allowance to keep the center of the path from passing too close to an obstacle. The path of travel tool is not able to calculate vertical distances, i. You can use Path of Travel tools to help you analyze plans for travel distances related to life safety in your designs, but this is only scratching the surface of what you might be able to do.
Typically, you will be able to narrow down which room s are going to have the maximum travel distance in your design. Use the path of travel tool to verify your assumptions and quantify the actual travel distance.
In the video below 2 path of travel lines are added to the most distant corners of the room farthest from the exits. In the video below a waypoint a Revit You can also check for dead-end corridor length. Looking at the same plan from before, a design change has created a dead-end corridor condition. In the video the length is checked by placing a path of travel line from the exit position to the end of the corridor without an exit. In this video you will see a view filter added to the view to change the color of the path of travel line as it exceeds the allowed length of a dead-end corridor.
The common path limit is how much of the overall exit path can be part of a common path. Use the path of travel tool to reveal common path conditions in your designs. In the video you see exits from 2 rooms that have a common path before they reach a point where 2 distinct paths to exits are available.
Seeing as this tool has been around for a couple years now Hi Jeff, we have stated to look at using this, is there a way of going from floor to floor and taking into account the additional allowance for stairs??
Currently there is not a way to have the path of travel tool calculate from floor to floor, but it would be a great addition. For now you need to calculate each floor on its own and then add them together. Connect with: Log in. Jeff Hanson February 18, Maximum travel distance to the nearest exit Typically, you will be able to narrow down which room s are going to have the maximum travel distance in your design.
Dead-End Limit You can also check for dead-end corridor length. Have a question or cool path of travel use case? Tell us about it in the comments. Try Revit Free for 30 Days. Get Free Trial. Related Articles. Have you tried. Have You Tried? Investigating Revit features and workflows. Carl Brown Seeing as this tool has been around for a couple years now Jeff Hanson Currently there is not a way to have the path of travel tool calculate from floor to floor, but it would be a great addition.
Comments
Post a Comment